|
 |
Cranesong
Description
Cranesong: Designer Dave Hill has always had an interest in electronics, and started designing and building devices at an early age. He was building synthesizers from scratch and started doing professional level sound recording and equipment maintenance at a local music store while still in school. After high school Dave decided to pursue a career in electronics and enrolled in a course at a local community college. After his first semester he was asked by the college to take over teaching the course. He taught for 8 years and continued his involvement in pro audio.
To date Dave has been doing studio and film sound recording since 1972. He has also been involved in film post production. Early in the 1980's Dave was asked by a used equipment dealer if he could design a tube compressor that would have the sound of the older tube type devices and still be clean enough to compete with modern devices. The result of this request was the Summit Audio TLA-100. Due to the success of that design Dave Hill went on to design and set up the manufacture of all Summit Audio products until September of 1994 at which time Summit Audio was relocated the manufacturing to California. From 1984 to 1994 Summit Audio grew from a single product and one employee working out of the basement of Dave's home to a full product line and over a dozen fulltime employees ...
To date Dave has been doing studio and film sound recording since 1972. He has also been involved in film post production. Early in the 1980's Dave was asked by a used equipment dealer if he could design a tube compressor that would have the sound of the older tube type devices and still be clean enough to compete with modern devices. The result of this request was the Summit Audio TLA-100. Due to the success of that design Dave Hill went on to design and set up the manufacture of all Summit Audio products until September of 1994 at which time Summit Audio was relocated the manufacturing to California. From 1984 to 1994 Summit Audio grew from a single product and one employee working out of the basement of Dave's home to a full product line and over a dozen fulltime employees ...
Category
Keywords
Date
Jan 27, 2005
Contact name
Email
Link ID
469
Write a Review
Add to My Favorite
Refer it to Friend
Report Broken Link
Other links at Pro Audio Brands
Wave:Space is a full service
Acoustical Design and Engineering firm specializing in Sound
Recording, Video Production, Motion Picture and Broadcast Facilities.
Wave:Space, Inc. was founded to implement the practical application of acoustic technology for the entertainment production industry. From this foundation, Wave:Space has expanded into a comprehensive design-build firm, encompassing all aspects of design, engineering and construction. We realized that even the best design could be easily compromised by faulty execution, that every detail counts.
Thorough planning and design are important to every project, but even more so to a facility in which proper acoustics and the integration of technical equipment are involved. Our experience has proven that the optimal design is multi-faceted - integrating architectural, acoustical, interior, electrical, mechanical and systems concepts, targeting the specific needs of the client’s project in every detail.
Our design services can range in scope from consultation through complete, detailed working drawings. On many projects, we have worked in conjunction with local design, engineering and construction firms, supplementing their services with the benefits of our specialized experience.
We always suggest that we become involved at the earliest possible stage of the project. By arranging and coordinating the total requirements of the project in advance, unnecessary or duplicate work can be avoided and no detail will be overlooked - always resulting in a savings in time, money and aggravation.
In any technical facility, in order to gain the maximum performance benefits, the electronic equipment should be designed and installed as a part of a complete, interconnected system - including not only the equipment itself but also its architectural, electrical and climatic environment.
Wave:Space can provide consultation for the selection of all electronic equipment as well as complete systems integration documentation. To execute the electronic systems design, Wave:Space can provide labor and materials for the complete installation and testing of all equipment.
The construction of an entertainment production facility utilizes special techniques and requires meticulous attention to detail to realize the full potential of any design. Wave:Space can provide construction project management, construction supervision or complete construction services to insure that every detail of the design is efficiently and properly implemented.
acoustical consultants,
acoustics, acoustical, consultants, acoustical design, design,
designers, facility design, facility, recording, video, audio,
broadcast, post production, studio design, studio designers, studios, Carl Yanchar, monitoring systems:
active series:
The Wave:Space Active Control Room Monitor Systems are the latest in an evolutionary series of control room monitors. Now featuring a high frequency ribbon driver capable of producing extremely high sound pressure levels, the system is ideally suited to the critical listening environment.
The unique high frequency driver utilizes a flat, rectangular diaphragm where the driving force is an integrated part of the sound radiating surface, resulting in an extremely low mass. The natural advantage is not only a flat frequency response to beyond 30 kHz but also superior transient performance and several orders of magnitude less distortion than the more familiar compression driver and horn combination which it replaces.
The low frequency drivers are equally innovative, employing a multi-magnet cluster to reduce distortion and improve cooling. Both single and dual woofer systems are available.
The complete system also includes appropriate power amplifiers, 4th order Bessell active crossovers, and 1/3 octave equalizers. The standard cabinets are finished in black lacquer. Custom sizes and wood veneers are available.
passive series: The Wave:Space Passive Control Room Monitor Systems are identical to the biamped series with one exception. The passive series utilizes an extremely high quality passive crossover system in place of the 4th order Bessell active crossover.
custom equipment: Integral to the facilities we design, is of course the equipment. As part of our engineering services, Wave:Space also designs and manufactures a complete line of custom products for systems integration.
• Microphone & Tape Machine Panels
• Patch Bays
• Monitor Switching Systems
• Surround Sound Monitor Switching Systems
• Headphone Distribution Boxes
• 8 Channel Active Headphone Boxes
• Active and Transformer Direct Boxes
Many standard designs are available which can be adapted for a particular application.
systems integration: Wave:Space can provide consultation for the selection of all electronic equipment, as well as complete systems integration documentation.
We can provide complete interconnect design, as well as fabrication of all custom cabling. To execute the electronic systems design, Wave:Space can provide labor and materials for the complete installation and testing of all equipment.
studio furniture: • Outboard Cabinet Design
• Custom Post-Production Workstations
• Studio Gobos
• Portable Drum Platforms
• Conductor Podiums
Acoustical Design and Engineering firm specializing in Sound
Recording, Video Production, Motion Picture and Broadcast Facilities.
Wave:Space, Inc. was founded to implement the practical application of acoustic technology for the entertainment production industry. From this foundation, Wave:Space has expanded into a comprehensive design-build firm, encompassing all aspects of design, engineering and construction. We realized that even the best design could be easily compromised by faulty execution, that every detail counts.
Thorough planning and design are important to every project, but even more so to a facility in which proper acoustics and the integration of technical equipment are involved. Our experience has proven that the optimal design is multi-faceted - integrating architectural, acoustical, interior, electrical, mechanical and systems concepts, targeting the specific needs of the client’s project in every detail.
Our design services can range in scope from consultation through complete, detailed working drawings. On many projects, we have worked in conjunction with local design, engineering and construction firms, supplementing their services with the benefits of our specialized experience.
We always suggest that we become involved at the earliest possible stage of the project. By arranging and coordinating the total requirements of the project in advance, unnecessary or duplicate work can be avoided and no detail will be overlooked - always resulting in a savings in time, money and aggravation.
In any technical facility, in order to gain the maximum performance benefits, the electronic equipment should be designed and installed as a part of a complete, interconnected system - including not only the equipment itself but also its architectural, electrical and climatic environment.
Wave:Space can provide consultation for the selection of all electronic equipment as well as complete systems integration documentation. To execute the electronic systems design, Wave:Space can provide labor and materials for the complete installation and testing of all equipment.
The construction of an entertainment production facility utilizes special techniques and requires meticulous attention to detail to realize the full potential of any design. Wave:Space can provide construction project management, construction supervision or complete construction services to insure that every detail of the design is efficiently and properly implemented.
acoustical consultants,
acoustics, acoustical, consultants, acoustical design, design,
designers, facility design, facility, recording, video, audio,
broadcast, post production, studio design, studio designers, studios, Carl Yanchar, monitoring systems:
active series:
The Wave:Space Active Control Room Monitor Systems are the latest in an evolutionary series of control room monitors. Now featuring a high frequency ribbon driver capable of producing extremely high sound pressure levels, the system is ideally suited to the critical listening environment.
The unique high frequency driver utilizes a flat, rectangular diaphragm where the driving force is an integrated part of the sound radiating surface, resulting in an extremely low mass. The natural advantage is not only a flat frequency response to beyond 30 kHz but also superior transient performance and several orders of magnitude less distortion than the more familiar compression driver and horn combination which it replaces.
The low frequency drivers are equally innovative, employing a multi-magnet cluster to reduce distortion and improve cooling. Both single and dual woofer systems are available.
The complete system also includes appropriate power amplifiers, 4th order Bessell active crossovers, and 1/3 octave equalizers. The standard cabinets are finished in black lacquer. Custom sizes and wood veneers are available.
passive series: The Wave:Space Passive Control Room Monitor Systems are identical to the biamped series with one exception. The passive series utilizes an extremely high quality passive crossover system in place of the 4th order Bessell active crossover.
custom equipment: Integral to the facilities we design, is of course the equipment. As part of our engineering services, Wave:Space also designs and manufactures a complete line of custom products for systems integration.
• Microphone & Tape Machine Panels
• Patch Bays
• Monitor Switching Systems
• Surround Sound Monitor Switching Systems
• Headphone Distribution Boxes
• 8 Channel Active Headphone Boxes
• Active and Transformer Direct Boxes
Many standard designs are available which can be adapted for a particular application.
systems integration: Wave:Space can provide consultation for the selection of all electronic equipment, as well as complete systems integration documentation.
We can provide complete interconnect design, as well as fabrication of all custom cabling. To execute the electronic systems design, Wave:Space can provide labor and materials for the complete installation and testing of all equipment.
studio furniture: • Outboard Cabinet Design
• Custom Post-Production Workstations
• Studio Gobos
• Portable Drum Platforms
• Conductor Podiums
Category:
Pioneer Electronics Inc. - TAD - Professional Speakers.
pioneer, electronics, For Business , TAD - Professional Speakers
pioneer, electronics, For Business , TAD - Professional Speakers
Category:
3. TCS Audio
TCS Audio (which stands for Touring Concert Systems) was officially launched in the summer of 2004 with the announcement of a new division at Carvin dedicated to creating high-end sound reinforcement products for professional touring and fixed install applications.
With over 50 years of continuous success in manufacturing musical instruments and electronic audio equipment, Carvin is one of the oldest audio manufacturing companies in existence today.
The company is still family-run to this day and provides excellent quality and service to their loyal customer base.
Carvin took this dedication and passion for music into the planning for a new sound reinforcement division focused on high-end products. The company’s 80,000 square foot factory in San Diego, California is where the TCS Audio products are manufactured. This state-of-the-art environment is also where the engineering, sales, and marketing teams reside, creating an efficient work place for team interaction and planning.
The company decided that the most effective approach would be to build the best products possible, provide excellent support and maintain close communication channels with dealers and customers.
TCS Audio, unlike Carvin, which sells direct, utilizes a dealer network. The company knew that this was the proper way to provide venues, facilities and touring bands product recommendations and support.
TCS Audio is small enough to provide excellent support and communication, but large enough to meet the demanding needs of the professional sound reinforcement markets.
With over 50 years of continuous success in manufacturing musical instruments and electronic audio equipment, Carvin is one of the oldest audio manufacturing companies in existence today.
The company is still family-run to this day and provides excellent quality and service to their loyal customer base.
Carvin took this dedication and passion for music into the planning for a new sound reinforcement division focused on high-end products. The company’s 80,000 square foot factory in San Diego, California is where the TCS Audio products are manufactured. This state-of-the-art environment is also where the engineering, sales, and marketing teams reside, creating an efficient work place for team interaction and planning.
The company decided that the most effective approach would be to build the best products possible, provide excellent support and maintain close communication channels with dealers and customers.
TCS Audio, unlike Carvin, which sells direct, utilizes a dealer network. The company knew that this was the proper way to provide venues, facilities and touring bands product recommendations and support.
TCS Audio is small enough to provide excellent support and communication, but large enough to meet the demanding needs of the professional sound reinforcement markets.
Category:
4. adam
ADAM-PROFESSIONAL AUDIO. You are welcome to have a look at the complete range of ADAM studio monitors.
ADAM studio monitors are state-of-the-art, no compromise speakers intended for audio engineers who are interested in the truest possible reproduction of their recordings. ADAM monitors have been constructed with one design objective only: to achieve the most realistic sound quality for each speaker in the line.
Groundbreaking innovation in electro-acoustic transducers, painstaking design and superior materials are the cornerstones of ADAM Technology. The authentic reproduction of recordings of acoustical events (a frequently discussed and subjective issue) is our yardstick in the unconditional search for the finest product possible. To achieve this goal we combine years of our own musical and acoustic experience and with feedback from the critical 'golden ears' of our professional customers, and double-check the results with the most advanced measurement techniques in order to ensure the finest sound reproduction available at any price.
ADAM Audio produces a complete range of both passive and active monitoring systems to suit any given studio environment, from the smallest home/project studios to the most demanding professional environments and applications.
audio,monitoring,loudspeakers, surround, sound,hifi,home theater,5.1,studios,music,nearfield,midfield,
mainfield,subwoofer,active,Adam,audio,recording,broadcast
ADAM studio monitors are state-of-the-art, no compromise speakers intended for audio engineers who are interested in the truest possible reproduction of their recordings. ADAM monitors have been constructed with one design objective only: to achieve the most realistic sound quality for each speaker in the line.
Groundbreaking innovation in electro-acoustic transducers, painstaking design and superior materials are the cornerstones of ADAM Technology. The authentic reproduction of recordings of acoustical events (a frequently discussed and subjective issue) is our yardstick in the unconditional search for the finest product possible. To achieve this goal we combine years of our own musical and acoustic experience and with feedback from the critical 'golden ears' of our professional customers, and double-check the results with the most advanced measurement techniques in order to ensure the finest sound reproduction available at any price.
ADAM Audio produces a complete range of both passive and active monitoring systems to suit any given studio environment, from the smallest home/project studios to the most demanding professional environments and applications.
audio,monitoring,loudspeakers, surround, sound,hifi,home theater,5.1,studios,music,nearfield,midfield,
mainfield,subwoofer,active,Adam,audio,recording,broadcast
Category:
5. audix
Professional Microphones & Monitors.AUDIX microphones mics monitors highest quality professional sound products BBBertram 3B Web Creations
Category:
Main Category
11
2005
555
335
215
6
791
59
2257
363
411
190
140
211
22
2321
74
120
3
178
36
145
105
36
14
26
1038
159
234
98
273
9
1068
151
245
144
312
255
348
15
78
214
128
70
414
536
2604
91
Top 10
Statistics
Links: 17467
Categories: 1112
Unique Outgoing Hits: 4636946
Pagerank Statistics
