|
Easy#FX-PI o1
Description
Easy#FX-PI o1:
Multi-FX-Plugin with
Phaser - Flanger - Chorus - Stereo
free vst plugin, pc.
Virtual Software Instruments, Synthesizer, VST, Midi, Virtuell Instruments
Multi-FX-Plugin with
Phaser - Flanger - Chorus - Stereo
free vst plugin, pc.
Virtual Software Instruments, Synthesizer, VST, Midi, Virtuell Instruments
Category
Date
Feb 26, 2007
Contact name
Email
Link ID
17589
Write a Review
Add to My Favorite
Refer it to Friend
Report Broken Link
Other links at Free VST plugins > flanger
PolarSplit= Flanger:
this flanger treats the positive and the negative parts of the incoming signal different.
free vst plugin, mac
this flanger treats the positive and the negative parts of the incoming signal different.
free vst plugin, mac
Category:
3. kr flanger
KR-Flanger features:
Uses High Quality interpolated delays.
Adjustable rate frequency from 0.5 to 7Hz
Adjustable LFO depth from 0 to 100%
Dry/Wet Mix adjustment
Output adjustment from -20 to +6db.
Host Sampling Frequency up to 96Khz.
For Microsoft Windows OS (VST) suitable for all Pentium CPUs.
Support for User definable presets (Save & Load) via Host interface.
free vst plugin, pc.
Uses High Quality interpolated delays.
Adjustable rate frequency from 0.5 to 7Hz
Adjustable LFO depth from 0 to 100%
Dry/Wet Mix adjustment
Output adjustment from -20 to +6db.
Host Sampling Frequency up to 96Khz.
For Microsoft Windows OS (VST) suitable for all Pentium CPUs.
Support for User definable presets (Save & Load) via Host interface.
free vst plugin, pc.
Category:
Braindoc's Stereo Flanger: Stereo-Flanger is a VST-plugIn for the creation of comb-filter and flanger effects. A comb-filter delays the incoming signal by a certain amount of time and mixes the delayed signal with the original signal. Because of interference between the two signals, there will be peaks and notches in the resulting signal - peaks occur at frequencies, where the original and delayed signal are in phase, notches occur at frequenceis, where the phase bewteen the original and the delayed signal is 180° - at these frequencies, the two signals cancel out each other. The positions of these peaks and notches is determined by the delay-time and they will always have a harmonic relationship - that is: they are all integer multiples of some fundamental frequency. It is also possible to feed back the output of the delayline back to its input - this emphasizes the peaks in the spectrum. When the delaytime is modulated over time (with a LFO, for example), the peaks and notches slide back and forth on the frequncy-axis - this is flanging. Stereo-Flanger provides two LFO-modulated delaylines - one for the left and one for the right channel.
free vst plugin, pc.
free vst plugin, pc.
Category:
TK-Flangdestructor:
TK-FlangDestructor is a succession of 3 delay effects.
: this effect can produce a large variety of flanged atmospheres.
- Input always pass through the first flanger, inputs for post flanger 1 and 2 are settled with send knobs.
- Independent depth for each flanger. Rendering can be very different according to the position of the 3 flanger depths.
- Feedback setting works for the first flanger only, be careful using it : it could make the system unstable for high feedback values.
- Filter module for the feedback, 4 filter types : LowPass HighPass BandPass and Notch. Cutoff according to Q factor produces good effects. Notice that filter has no effect if feedback is 0%.
- Inject Mode : reinject signals taken from several points in the previous stage to the post flanger 2.
- Parameters are very interdepedent.
- Output gain to 6dB.
- Output gain to 6dB.
free vst plugin, pc.
TK-FlangDestructor is a succession of 3 delay effects.
: this effect can produce a large variety of flanged atmospheres.
- Input always pass through the first flanger, inputs for post flanger 1 and 2 are settled with send knobs.
- Independent depth for each flanger. Rendering can be very different according to the position of the 3 flanger depths.
- Feedback setting works for the first flanger only, be careful using it : it could make the system unstable for high feedback values.
- Filter module for the feedback, 4 filter types : LowPass HighPass BandPass and Notch. Cutoff according to Q factor produces good effects. Notice that filter has no effect if feedback is 0%.
- Inject Mode : reinject signals taken from several points in the previous stage to the post flanger 2.
- Parameters are very interdepedent.
- Output gain to 6dB.
- Output gain to 6dB.
free vst plugin, pc.
Category:
Main Category
8
1996
553
332
212
6
788
52
2257
361
411
189
140
210
18
2320
74
119
3
172
34
145
105
31
14
14
1034
157
233
87
267
9
1051
148
243
132
312
247
346
15
73
212
127
68
407
533
2601
86
Top 10
Statistics
Links: 17335
Categories: 1112
Unique Outgoing Hits: 3978005
Pagerank Statistics
