The Focusrite brand was established way back in 1985 and the founding principles of the company were to develop products that sounded more musical, in addition to just measuring well - today,we still carry these founding principles forward in our class-leading and award-winning designs.
We measure our success by the success of you, our clients, and you will find Focusrite product prominent in professional and project studios throughout the world.
Based just outside of London, we work with the best design talent throughout the world to bring you the tools to enhance the way you work. Our product is made with pride and principle in a highly automated ISO 9002 factory with significant level of test by engineers who themselves are musicians and understand the part our product plays in your process.
liquid channel,liquid mix, saffire, saffire le, saffire pro 10 i/o, saffire pro 26 i/o, compounter, octopre, octopre le, trakmaster pro, twintrak pro, voicemaster pro , isa 220 , isa 428, isa 430 mkII, red 1 red 3, red 7, red 8, saffire plugins, forte suite, isa 220/isa430 mk1 adc, isa 428 adc, isa 430 mkII adc, octopre adc, octopre le codec , platinum pro adc
Designer Dave Hill has always had an interest in electronics, and started designing and building devices at an early age. He was building synthesizers from scratch and started doing professional level sound recording and equipment maintenance at a local music store while still in school. After high school Dave decided to pursue a career in electronics and enrolled in a course at a local community college. After his first semester he was asked by the college to take over teaching the course. He taught for 8 years and continued his involvement in pro audio.
To date Dave has been doing studio and film sound recording since 1972. He has also been involved in film post production. Early in the 1980's Dave was asked by a used equipment dealer if he could design a tube compressor that would have the sound of the older tube type devices and still be clean enough to compete with modern devices. The result of this request was the Summit Audio TLA-100. Due to the success of that design Dave Hill went on to design and set up the manufacture of all Summit Audio products until September of 1994 at which time Summit Audio was relocated the manufacturing to California. From 1984 to 1994 Summit Audio grew from a single product and one employee working out of the basement of Dave's home to a full product line and over a dozen fulltime employees ...
avocet, stereo controller, egret, workstation back end, stereo line mixer, spider, 8-channel mic-pre amplifier/mixer, trakker, single channel discrete class a compressor limiter, class a, hedd, a/d, d/a, converters, pro studio recording, project studios, daw, mastering, preparation, stc-8, stereo compressor, peak limiter, flamingo, 2-channel discrete class a microphone preamplifier, analog dither, add warmth to your tracks, phoenix, tdm plug-in.
Aphex Systems was founded in 1975 in Massachusetts by Marvin Caesar and Curt Knoppel, the inventor of the Aural Exciter™.
The first Aural Exciter™ units were available exclusively on the rental basis of $30 per minute of finished recorded time.
The unit became so popular, especially with the Los Angeles music/recording studio crowd, that Aphex had to move to Hollywood.
Recognizing that there was a much bigger market than just the rental business, Aphex started selling the professional units, and introduced two low-cost models: Type B and Type C. The Aural Exciter circuit is now licensed by a growing list of manufacturers, including Yamaha, MacKenzie, Gentner, Emu and Bogen.
Aphex is dedicated to the development of high-quality products for the professional audio, broadcast, fixed installation, touring-sound and home-recording markets. Through that dedication, Aphex has developed a number of industry-standard devices, such as the Compellor®, Dominator®, Expander/Gate™ and Expressor,™ plus the Model 1100 Two-Channel and Model 1788 Eight-Channel Ultra-Precision Remotely Controllable Microphone Pre-Amplifiers, and the Model 2020 Mk III Broadcast Audio Processor.
Audio Research Labs is a media technology consulting company whose mission is to bridge the gap between where your company is now and where it needs to be in order to succeed in your business. We offer more than 40 years of high-tech experience in development and real-time implementation of speech, audio and video signal processing algorithms, for both general-purpose and embedded platforms.
Trillium Lane Labs is a leading developer of audio software for professionals in the recording and post-production industries. Trillium Lane Labs is a Digidesign development partner for the Pro Tools digital audio workstation on Macintosh and Windows platforms.Trillium Lane Labs, Pro Tools, Digidesign, TL Space, convolution reverb, TL EveryPhase, phaser, TL Metro, TL InTune, TL MasterMeter, TL Fauxlder, plugin, DAW, RTAS, TDM