GLow is a resonant low-pass filter. It is used to remove all frequencies from a signal above a given cut-off point.
Increasing the resonance of the filter causes the frequencies around the cut-off to be boosted.
Resonance can create large peaks in the output. Because of this, the GUI features a peak display showing the maximum peak output level. The peak display is reset by clicking on it.
Parameters
Gain: The gain applied to the incoming signal.
Cut Off: The cut-off frequency. Frequencies above this will be removed.
Res: The resonance of the filter.
free vst plugin. pc
Band cut: un plug comportant deux filtre : un haut et un bas avec une grosse pente de 24 db/octave pour supprimer une bande de fréquence. Exemple : supprimer les basses fréquences en dessous de 80 Hz pour les enregistrements de voix.
free vst plugin. pc
Skyes - a spectral filter .
Free spectral filter made with Max/MSP.
Pluggo is an extraordinary set of multiplatform audio plugins. (AU/RTAS/VST) I'm sharing several free ones made with MAX/MSP . You must have Pluggo, Pluggo Demo, or a free Pluggo Runtime installed to use it. Installation will create a Pluggo folder inside /Library/Audio/Plug-ins/VST (OSX) - or - /Digidesign/ProTools (OS9). To install my pluggos - simply drop it into Pluggo folder and start your Cubase/Logic/ProTools.
free vst plugin, mac.
Comb bank: three bandpass filters and an lfo (2 turntables..) can be more than, less than, or equal to classic phasing effect. 2 bp filters (stereo)=up there on the cpu, since that high Q is just the sound.. imho the only vst phaser that comes close to the 'balls' of my old maestro pedal. sorry, but no like 'em. picky phaser.
free vst plugin. pc
GHi is a resonant high-pass filter. It is used to remove all frequencies from a signal below a given cut-off point.
Increasing the resonance of the filter causes the frequencies around the cut-off to be boosted.
Resonance can create large peaks in the output. Because of this, the GUI features a peak display showing the maximum peak output level. The peak display is reset by clicking on it.
High-pass filters are especially useful for removing unwanted or inaudible bass frequencies. In a mix, you usually want the bass to come from one or two specific tracks. Removing the bass from the other tracks can make mixing easier and help eliminate "mud" from the final mix.
Parameters
Gain: The gain applied to the incoming signal.
Cut Off: The cut-off frequency. Frequencies below this will be removed.
Res: The resonance of the filter.
free vst plugin. pc
Scuzzphut6.5-lite takes the step sequencer from scuzzphut6 and makes it a dedicated plugin with several improvements, including:
improved GUI - both in terms of looks and functionailty,
steps can be set/cleared by dragging,
CPU use now minimal,
pattern selector for 8 patterns,
pattern changes happen sync'd to the bar start,
midi control of pattern changes - midi notes C to G (any octave) select patterns 1-8,
works in sonar.
free vst plugin. pc