Studio design, post-production studio design.
Small sound reproduction rooms pose particular problems in acoustic design. Go into a small untreated bare room and clap your hands, and you usually get a distorted sound. The sound direct from your hands is quickly followed by reflections from the walls, ceiling and floor ...
A brief overview of design criteria for post production studios, listening rooms
Elctronic Musician:
Truth or Consequences: Improve Your Studio's Acoustics.
I hate to be the one to break the news, but the control room you've grown to love is a saboteur and a liar. You had hoped that dressing it up with acoustical treatments and fancy reference monitors would make it tell you the truth about your mixes. But no it continues to mislead you, doling out a confusing mix of weak and boomy frequencies that leave you wondering where the truth really lies ...
control,room,
frequencies,
not,frequency,EQ,
Room,equalizer,
modes,
Hz,Fig,Once,
SpectraFoo
Russ Berger Design Group is a design and consulting firm specializing in recording and broadcast studio design and planning; corporate production, media and entertainment facilities. An eight-time recipient of the TEC Award for design excellence, RBDG has more than 2,000 recording, production and broadcast studio projects to its credit.
MLSSA by DRA Laboratories is the loudspeaker industry's standard measurement system. MLSSA is also used by automakers, recording studios, acousticians and government agencies to measure sound systems, room acoustics and speech intelligibility.
The MLSSA Remote Controlled Analog Interface (RCAI) is now available. The RCAI allows you to perform both frequency response and impedance measurements of loudspeakers without pausing to switch cables or change the MLSSA setup. Impedance and frequency response curves can be displayed and printed together on the same graph. Reference loopback measurements of even the highest powered amplifiers are performed automatically and safely. The RCAI also includes a four-input microphone multiplexer for automated spatially averaged room measurements. Up to four units can be daisy chained to expand the number of inputs and/or power amplifiers supported by a single MLSSA 2000 card.