S p a t C u b e 8 8
Positions of eight inputs inside a "cube" :
- eight inputs to eight outputsdans un dispositif cubique
- the position of the speakers is fixed
- distance settings for each input / speaker (64 values)
- the positions and the movements of the eight inputs (one by one) are exclusively made with a standard joystick
- the vertical dimension can be set to the rotating handle or the lever
Compatible with all 2D and 3D joystick which has eight buttons.
Applications :
- static positions of monophoniques inputs (instruments...)
- recording of the movements automation for each channel
V.I Stereo to 5.1 Converter vst plugin suite:
V.I is a free VST plugin for designed to convert a stereo input to a 5.1 audio output. You can then save this data in a file and encode it into a surround sound file using appropriate software. V.I cannot go back into a recording studio and separate the original multitrack audio into separate channels, but it can extract ambience information embedded in the stereo audio and redistribute it among 5.1 channels. Recording engineers, audio engineers and enthusiasts have been doing this kind of thing for years in one way or another. V.I simply combines some of their techniques in one VST plugin.
Features
Width correction helps compensate for source files that were mixed too narrow or too wide.
Independent controls for adding ambience to the front or rear soundstage.
Pass-through of original left and right signals ensures accurate reproduction of original stereo imaging (when not in Movie Mode).
Companion fLfR, CLFE, and sLsR VST plugins duplicate V.I’s effects in channel pairs for VST hosts that do not support multichannel plugins such as V.I
Movie Mode switch redirects some dialog frequencies from front left and right channels to the center channel to enhance dialog while still maintaining a good stereo soundstage.
Sourround encode vst effect plugins:
free package for dolby prologic / dolby prologic II surround encoding.
Use this plugins to give more depth to your stereo recordings and make them surround compatible!
This VST plugin uses a six bands filter to spread a mono signal to "fake" stereo signal, it has panning+LFO on every band so you can make dynamic effects, you can make slow and subtle changes as well as making extreme panning modulation, it works great on drumloops and strings and it works specially nice on synths.
Specs:
Six HP/BP/BR/LP filters with frequency, resonance, gain,
Panning on each band and LFO->Pan with frequency and depth controls.
Listen to an example (dry, preset1, dry, preset2, dry, preset3 etc...)
This is a bunch of "tools" intended to process stereo streams but focusing on middle and side instead of left and right.
The idea is *really* simple but the effects can be subtle and powerful.
:msEncode and msDecode:
These to ones are just converters mapping M -> L and S -> R so that you can put your own effects between the coder and the decoder. The effects below are just some hard-coded ones.
:msComp:
This one uses the same compression algorithm as my "classic" compressor, but focus on the Middle signal without touching at the Side. A typical use of this effect is to boost a mix without touching at the stereo image.
:msBalance:
2 separate gains for the Middle and side signals.
:msSwap:
it just swap the Middle and Side. You can use it before msComp if you want to compress the side instead of the Middle.
:msDelay:
This is a simplified version of analog delay that you can use to delay either the middle or the side.
free vst plugin. pc, mac