|
wackofilter
Description
Wackofilter:
Features:
- stereo multimode filter with cutoff and resonance
- several different filter algorithms available (from standard LP/HP to more special ones)
- adjustable filter steepness (12 dB or 24 dB)
- cool effect unit with Phase, Delay, Distortion and Pitcher!
- controls for dry/wet and output volume
- adjustable filter-effect routing
- output can be mono or stereo, optionally inverted
- 2 independent LFOs, both have:
- 6 different waveforms (Sine, Saw, Square, Triangle, Noise, Sample&Hold)
- speed and depth control
- destination can be almost any other parameter, LFO1 can also modulate LFO2 !
- each LFO can be synchronized to the host tempo independently,
each with different multiplicator settings.
Download the latest demo version of WackoFilter from here.
Only limitation of the demo is that it won't save presets.
free vst plugin. pc
Features:
- stereo multimode filter with cutoff and resonance
- several different filter algorithms available (from standard LP/HP to more special ones)
- adjustable filter steepness (12 dB or 24 dB)
- cool effect unit with Phase, Delay, Distortion and Pitcher!
- controls for dry/wet and output volume
- adjustable filter-effect routing
- output can be mono or stereo, optionally inverted
- 2 independent LFOs, both have:
- 6 different waveforms (Sine, Saw, Square, Triangle, Noise, Sample&Hold)
- speed and depth control
- destination can be almost any other parameter, LFO1 can also modulate LFO2 !
- each LFO can be synchronized to the host tempo independently,
each with different multiplicator settings.
Download the latest demo version of WackoFilter from here.
Only limitation of the demo is that it won't save presets.
free vst plugin. pc
Category
Date
Jul 7, 2005
Contact name
Email
Link ID
9129
Write a Review
Add to My Favorite
Refer it to Friend
Report Broken Link
Other links at Free VST plugins > filters
1. gband
GBand is a band-pass filter. It removes frequencies from the input that are above or below the specified cut-off points.
GBand uses a high- and a low-pass filter in series to remove the unwanted frequencies. It is equivalent to using GHi and GLow, one after the other.
Band-pass filters are useful during mixing to remove unnecessary frequencies from a track. A track that sounds fine on its own can sometimes be difficult to fit into a mix. Narrowing its frequency range will often help.
Resonance boosts the volume of frequencies around the cut-off points. This can create large peaks in the output. Because of this, the GUI features a peak display showing the maximum peak output level. The peak display is reset by clicking on it.
Parameters
Gain: The gain applied to the incoming signal.
Lo Cut: The lower cut-off frequency. Frequencies below this will be removed.
Hi Cut: The upper cut-off frequency. Frequencies above this will be removed.
Res: The resonance of the high- and low-pass filters.
free vst plugins, pc.
GBand uses a high- and a low-pass filter in series to remove the unwanted frequencies. It is equivalent to using GHi and GLow, one after the other.
Band-pass filters are useful during mixing to remove unnecessary frequencies from a track. A track that sounds fine on its own can sometimes be difficult to fit into a mix. Narrowing its frequency range will often help.
Resonance boosts the volume of frequencies around the cut-off points. This can create large peaks in the output. Because of this, the GUI features a peak display showing the maximum peak output level. The peak display is reset by clicking on it.
Parameters
Gain: The gain applied to the incoming signal.
Lo Cut: The lower cut-off frequency. Frequencies below this will be removed.
Hi Cut: The upper cut-off frequency. Frequencies above this will be removed.
Res: The resonance of the high- and low-pass filters.
free vst plugins, pc.
Category:
The Classic Auto-Filter is an analog modeled four-pole filter with resonance control. It can be used for creative effects like auto-wah-wah and filter sweeps, as well as a fixed filter for equalizing purposes. The filter is selectable between low-pass, high-pass, band-pass and band-reject (notch). The filter cut-off frequency can be modulated from the envelope follower and the LFO.
Features:
Modulated four pole filter with resonance,
Syncable LFO with sine, random-hold and stereo spread,
Envelope follower with adjustable attack and release,
Presets,
Very low CPU usage,
Supports sampling rates on and above 44100 Hz,
Full VST automation.
free vst plugin. pc
Features:
Modulated four pole filter with resonance,
Syncable LFO with sine, random-hold and stereo spread,
Envelope follower with adjustable attack and release,
Presets,
Very low CPU usage,
Supports sampling rates on and above 44100 Hz,
Full VST automation.
free vst plugin. pc
Category:
3. trancemitter
4. qwarp filter
This plugin allows the user to perform a warped LP analysis of the input signal for each of four independent filter banks, whereafter the user can warp between all four filters using the XY touchpad control or use the 'filter warp' slider to change the warping in the filtering stage. The results tend towards bellish sounds or weird sleeping sounds reminiscent of the EMU Morpheus' filters. Only available as a Windows VST.
free vst plugin. pc
free vst plugin. pc
Category:
5. resonnateur
Main Category
8
1995
551
332
212
6
787
52
2257
361
411
189
140
209
17
2320
74
119
3
171
34
145
105
31
14
14
1034
157
232
86
265
9
1050
148
241
131
312
244
344
15
73
212
127
68
406
532
2600
86
Top 10
Statistics
Links: 17322
Categories: 1112
Unique Outgoing Hits: 3957546
Pagerank Statistics
