|
Web Links [Tag : gvst]
1. grevdly
GRevDly is a delay effect I wrote to give an eerie feel to an intro for a song. It plays the delayed signal in reverse. Reversed chunks are cross-faded to eliminate clicks - the overlap parameter controls the length of the fade.
Parameters
Time: The size of reversed chunks.
Overlap: The length of the... >>read more
Parameters
Time: The size of reversed chunks.
Overlap: The length of the... >>read more
Category:
Member Reviews
Visitor Ratings 
Google PR 2. ghi
GHi is a resonant high-pass filter. It is used to remove all frequencies from a signal below a given cut-off point.
Increasing the resonance of the filter causes the frequencies around the cut-off to be boosted.
Resonance can create large peaks in the output. Because of this, the GUI features a peak display... >>read more
Increasing the resonance of the filter causes the frequencies around the cut-off to be boosted.
Resonance can create large peaks in the output. Because of this, the GUI features a peak display... >>read more
Category:
Member Reviews
Visitor Ratings Google PR 3. glow
GLow is a resonant low-pass filter. It is used to remove all frequencies from a signal above a given cut-off point.
Increasing the resonance of the filter causes the frequencies around the cut-off to be boosted.
Resonance can create large peaks in the output. Because of this, the GUI features a peak display... >>read more
Increasing the resonance of the filter causes the frequencies around the cut-off to be boosted.
Resonance can create large peaks in the output. Because of this, the GUI features a peak display... >>read more
Category:
Member Reviews
Visitor Ratings Google PR 4. gcomp
GComp is a combined compressor and limiter for controlling the dynamics of an audio signal.
GComp tracks both the peak and the RMS level of the incoming signal. The level considered for compression can be either of these, or a mix of both. The mix is controlled by the RMS/Peak parameter.
The compression curve is... >>read more
GComp tracks both the peak and the RMS level of the incoming signal. The level considered for compression can be either of these, or a mix of both. The mix is controlled by the RMS/Peak parameter.
The compression curve is... >>read more
Category:
Member Reviews
Visitor Ratings 
Google PR 5. ggate
GGate is a noise-gate effect. It silences the signal when its level drops below the threshold, given by the Thresh parameter.
You can specify the Fade, which is the amount of time taken to mute the signal, and the Attack, which is the time taken to unmute the signal.
When you are mixing several recorded tracks... >>read more
You can specify the Fade, which is the amount of time taken to mute the signal, and the Attack, which is the time taken to unmute the signal.
When you are mixing several recorded tracks... >>read more
Category:
Member Reviews
Visitor Ratings 
Google PR 6. gclip
GClip is a wave-shaping signal clipper. You can set the input gain, clip-level, and control the shape of the clipping curve.
free vst plugin. pc >>read more
free vst plugin. pc >>read more
Category:
Member Reviews
Visitor Ratings Google PR 7. gband
GBand is a band-pass filter. It removes frequencies from the input that are above or below the specified cut-off points.
GBand uses a high- and a low-pass filter in series to remove the unwanted frequencies. It is equivalent to using GHi and GLow, one after the other.
Band-pass filters are useful during mixing to... >>read more
GBand uses a high- and a low-pass filter in series to remove the unwanted frequencies. It is equivalent to using GHi and GLow, one after the other.
Band-pass filters are useful during mixing to... >>read more
Category:
Member Reviews
Visitor Ratings Google PR 8. gchorus
GChorus is a chorus effect. The incoming signal is mixed with a delayed copy of itself. The effect is created by modulating the playback speed of the delayed copy.
GChorus uses a sinusoidal LFO to vary the playback speed of the delayed signal. The magnitude and rate of this LFO are set using the Depth and Freq parameters.
... >>read more
GChorus uses a sinusoidal LFO to vary the playback speed of the delayed signal. The magnitude and rate of this LFO are set using the Depth and Freq parameters.
... >>read more
Category:
Member Reviews
Visitor Ratings Google PR 9. gcomp2
GComp2 is a compressor featuring a band-pass filter and a gate.
The compression is controlled with the Attack, Release and Compress parameters. The Compress parameter controls the compression curve, replacing the usual threshold and ratio parameters.
The level of the signal going into the compressor also affects... >>read more
The compression is controlled with the Attack, Release and Compress parameters. The Compress parameter controls the compression curve, replacing the usual threshold and ratio parameters.
The level of the signal going into the compressor also affects... >>read more
Category:
Member Reviews
Visitor Ratings Google PR 10. gdelay
GDelay is a digital delay effect. The delayed signal can also be fed-back into the delay line.
The output is a mix of the original and delayed signals. The level of each is controlled by the Dry and Effect parameters.
Parameters
Delay: The length of the delay.
Feedback: The level of the... >>read more
The output is a mix of the original and delayed signals. The level of each is controlled by the Dry and Effect parameters.
Parameters
Delay: The length of the delay.
Feedback: The level of the... >>read more
Category:
Member Reviews
Visitor Ratings Google PR
Main Category
1995
550
332
212
6
786
50
2257
361
411
188
140
209
17
2320
74
119
3
171
34
145
105
31
13
14
1032
157
231
85
263
9
1047
148
241
131
312
242
344
15
73
212
127
68
405
532
2600
86
Top 10
Statistics
Links: 17301
Categories: 1111
Unique Outgoing Hits: 3864070
Pagerank Statistics
